A Taguchi Method Optimization For Engine Parameters of VCR Engine Fuelled With Xanthium strumarium L. Oil Biodiesel Blend
Abstract
Keywords
Full Text:
PDFReferences
A. Singh, S. Sinha, A.Choudhary, D. Sharma, H. Panchal, and K. Sadasivuni, “An experimental investigation of emission performance of heterogenous catalyst jatropha biodiesel using RSM”, Case Studies in Thermal Engineering, Elsevier, DOI: 10.1016/j.csite.2021.100876, Vol. 25, 100876.
A. K. Agarwal, and K. Rajamanoharan., “Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine”, Applied Energy, Elsevier, DOI: 10.1016/j.apenergy.2008.04.008, Vol. 86, No. 1, pp. 106-112.
N. Dugala, G.. Goindi, and A. Sharma, “Experimental investigation on the performance and emissions characteristics of dual biodiesel blends on a varying compression ratio diesel engine”, SN Applied Sciences, Springer, DOI: 10.1007/s42452-021-04618-0, Vol. 3,622.
P. Sharma, and A.Sharma, “AI-Based Prognostic Modeling and Performance Optimization of CI Engine Using Biodiesel-Diesel Blends”, International Journal of Renewable Energy Research, Vol. 11, pp. 701-708, June 2021.
C. Cesur, T.Eryilmaz, T.Uskutoglu, H. Dogan, and B. Cosge Senkal, “Cocklebur (Xanthium Strumarium L.) Seed oil and its properties as an alternative biodiesel source”, Turkish Journal of Agriculture and Forestry, Vol. 45, pp. 29-37, February 2018.
R. Karmakar, K. Kundu, and A. Rajor, “Fuel properties and emission characteristics of biodiesel producedfrom unused algae grown in India”, Petroleum Science, Springer, DOI: 10.1007/s12182-017-0209-7, Vol. 15, pp. 385–395.
R. Rodriguez, Y. Sanchez-Borroto, E.Melo-Espinosa, and S. Verhelst, “Assessment of diesel engine performance when fuelled with biodiesel from algae and microalgae: An overview”, Renewable and Sustainable Energy Reviews, Elsevier, DOI: 10.1016/j.rser.2016.11.015, Vol. 899, pp. 833-842.
M. V. Kumar, A. V. Babu, and P. R. Kumar, “The impact on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine”, Alexandria Engineering Journal, Elsevier, DOI: 10.1016/j.aej.2016.12.016, Vol. 57, pp. 509-516.
S. V. Channapattana, A. A. Pawar, and P. G. Kambale, “Optimization of operating parameter of DI-CI engine fuelled with second generation Bio-Fuel and development of ANN based prediction model”, Applied Energy, Elsevier, DOI: 10.1016/j.apenergy.2016.11.030 , Vol. 187, pp. 84-95.
Y. D. Bharadwaz , B. G. Rao, V. D. Rao, and C. Anusha, “Improvement of biodiesel methanol blends performance in a variable compression ratio engine using response surface methodology”, Alexandria Engineering Journal, Elsevier, DOI: 10.1016/j.aej.2016.04.006, Vol. 55, pp. 1201-1209.
S. V. Channapattana, A. A. Pawar, and P. G. Kambale, “Effect of Injection Pressure on the Performance and Emission Characteristics of VCR engine using Honne Biodiesel as a Fuel”, Materials Today: Proceedings, Elsevier, DOI: 10.1016/j.matpr.2015.07.049, Vol. 2, pp. 1316-1325.
B. De, and R. S. Panua, “An experimental study on performance and emission characteristics of vegetable oil blends with diesel in a direct injection variable compression ignition engine”, Procedia Engineering, Elsevier, DOI: 10.1016/j.proeng.2014.11.873, Vol. 90, pp. 431–438.
K. Sivaramakrishnan, and P. Ravikumar, “Optimization of operational parameters on performance and emission of a diesel engine using biodiesel”, International Journal Environmental Science Technology, Springer, DOI: 10.1007/s13762-013-0273-5, Vol. 11, pp. 949–958.
S. V. Channapattana, C. Kantharaj, V. S. Shinde, A. A Pawar, and P. G. Kamble, “Emissions and Performance Evaluation of DI CI - VCR Engine Fuelled with Honne oil Methyl Ester / Diesel Blends”, Energy Procedia, Elsevier, DOI: 10.1016/j.egypro.2015.07.606, Vol. 74, pp. 281-288.
S. M. A. Rahman, H. H. Masjuki, M. A. Kalam, A. Sanjid, and M. J. Abedin, “Assessment of emission and performance of compression ignition engine with varying injection timing”, Renewable and Sustainable Energy Reviews, Elsevier, DOI: 10.1016/j.rser.2014.03.049, Vol. 35, pp. 221-230.
A. S. Silitonga, H. H. Masjuki, T. M. I. Mahlia, H. C. Ong, and W. T. Chong, “Experimental study on performance and exhaust emissions of a diesel engine fuelled with Ceibapentandra biodiesel blends”, Energy Conversion and Management, Elsevier, DOI: 10.1016/j.enconman.2013.08.032, Vol. 76, pp. 828-836.
S. M. Palash, M. A. Kalam, H. H. Masjuki, B. M Masum, I. M. Rizwanul Fattah, and M. Mofijur, “Impact of biodiesel combustion on NOx emissions and their reduction approaches”, Renewable and Sustainable Energy Reviews, Elsevier, DOI: 10.1016/j.rser.2013.03.003, Vol. 23, pp. 473-490.
Abbaszaadeh, B. Ghobadian, M. R. Omidkhah, and G. Najafi, “Current biodiesel production technologies: A comparative review”, Energy Conservation and Management, Elsevier, DOI: 10.1016/j.enconman.2012.02.027, Vol. 63, pp. 138-148.
E. Rajasekar, A. Murugesan, R. Subramanian, and N. Nedunchezhian, “Review of NOx reduction technologies in CI engines fuelled with oxygenated biomass fuels”, Renewable and Sustainable Energy Reviews, Elsevier, DOI: 10.1016/j.rser.2010.03.005, Vol. 14, pp. 2113-2121.
Y. C. Dennis, and X. Wu and M. K. H. Leung, “A review on biodiesel production using catalysed transesterification”, Applied Energy, Elsevier, DOI: 10.1016/j.apenergy.2009.10.006, Vol. 87, pp. 1083-1095.
S. Godiganur, C. H. Suryanarayana Murthy, and R. P. Reddy, “6BTA 5.9 G2-1 Cummins engine performace and emission test using methyl ester mahua (Madhucaindica)oil/diesel blends”, Renewable Energy, Elsevier, DOI: 10.1016/j.renene.2008.12.035, Vol. 34, pp. 2172-2177.
A. Demirbas, “Progress and recent trends in biodiesel fuels”, Energy Conservation and Management, Elsevier, DOI: 10.1016/j.enconman.2008.09.001, Vol. 50, pp. 14-34.
V. Pradeep, and R. P. Sharma, “Use of hot EGR for NOx control in a compression ignition engine fuelled with biodiesel from jatropha oil”, Renew Energy, Elsevier, DOI: 10.1016/j.renene.2006.04.017, Vol. 32, pp. 1136–54.
T. A. Megaritis A, M. L. Wyszynski, and K.Theinnoi, “Engine performance and emission of a diesel engine operating on diesel–RME (rapeseed methyl ester) blends with exhaust gas recirculation (EGR)”, Energy, Elsevier, DOI: 10.1016/j.energy.2007.05.016, Vol. 32, pp. 2072–80.
A. Monyem, J. H. V. Gerpen, and M. Canakai, “The effect of timing and oxidation on emission from biodiesel-fueled engines”, ASAE, DOI: 10.13031/2013.2301, Vol. 44, No. 1, pp. 35–42, 2001.
A. N. Kumar, P. S. Kishore, K. B. Raju, N. Kasianantham, and A. Bragadeshwaran, “Engine parameter optimization of palm oil biodiesel as alternate fuel in CI engine”, Environmental Science and Pollution Research, Springer, DOI: 10.1007/s11356-018-04084-z, Vol. 26, pp. 6652–6676.
NREL Report 510-36244, Biodiesel Production Technology, National Renewable Energy Laboratory, 2004.
Md. N. Nabi, Md. S. A., Mhia, and Md. Z. Shahadat, “Improvement of engine emissions with conventional diesel fuel and diesel–biodiesel blends”, Bioresource Technology, Elsevier, DOI: 10.1016/j.biortech.2005.03.013, Vol. 97, No. 3, pp. 372-378.
R. D. Misra, and M. S. Murthy, “Performance, emission and combustion evaluation of soapnut oil–diesel blends in a compression ignition engine”, Fuel, Elsevier, DOI: 10.1016/j.fuel.2011.03.003, Vol. 90, No. 7, pp. 2514-2518.
S. Ramalingam, and S. Rajendran, “14-Assessment of performance, combustion and emission behaviour of novel annona biodiesel operated diesel engine”, Advances in Eco-Fuels for a Sustainable Environment, Elsevier, DOI:10.1016/B978-0-08-102728-8.00014-0, pp. 391-405.
C. Srinidhi, A. Madhusudhan, S. V. Channapattana, S. V. Gawali, and K. Aithal, “RSM based parameter optimization of CI engine fuelled with nickel oxide based Azadrirachta indica methyl ester”, Energy, Elsevier, DOI:10.1016/j.energy.2021.121282, Vol. 234, 121282.
DOI (PDF): https://doi.org/10.20508/ijrer.v12i3.13065.g8545
Refbacks
- There are currently no refbacks.
Online ISSN: 1309-0127
Publisher: Gazi University
IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);
IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.
WEB of SCIENCE in 2025;
h=35,
Average citation per item=6.59
Last three Years Impact Factor=(1947+1753+1586)/(146+201+78)=5286/425=12.43
Category Quartile:Q4