Analysis and Verification of Wind Data from Ground-based LiDAR

Dongbum Kang, Jiyeong Hyeon, Kyoungboo Yang, Jongchul Huh, Kyungnam Ko


A study on the verification of reliability of measurements by the LiDAR (Light Detection and Ranging) system was conducted in Kimnyeong, on Jeju Island, South Korea. Also, the accuracy of the LiDAR measurements taken from the relatively flat-terrained Kimnyeong site was determined after factoring in the wind disturbance caused by the wake behind wind turbines. The 2.5-month wind data collected by the LiDAR were compared with concurrent wind data collected by the conventional anemometry on a nearby 120 m-high met mast for the verification. The measurement sectors (the area around the wind turbine where undisturbed wind speeds were measured) and the disturbed sectors (the areas around the wind turbine prone to wind disturbance) were estimated in accordance with the International Electrotechnical commission, IEC 61400-12-1. Data filtering was performed based on the criteria suggested by previous research. As a result, at 116 m above ground level, comparatively high LiDAR error rates of 0.50∼12.69 % were found in the disturbed sector, while relatively low LiDAR error rates of -0.93∼4.26 % were shown in the measurement sector. In the measurement sector, the absolute values of LiDAR error rates were about 5 % with the standard deviations of about 5 % at the heights of 100 and 116 m above ground level. The power law exponents calculated by using the met mast and the LiDAR data collected from the measurement sector were very similar to each other, whereas met mast and LiDAR data collected from the disturbed sector showed major discrepancies.

Total Views: 51


Wind energy; Wind data; Light detection and ranging (LiDAR) system; Wind shear; Power law

Full Text:



Roy, “Derivation of surface roughness and capacity factor from wind shear characteristics”, International Journal of Renewable Energy Research, vol. 2(2), pp. 348-55, 2012.

M. C. Brower, Wind Resource Assessment, John Wiley & Sons, Inc,, 2012, pp. 105-14, 117-29, 137-9.

P. Jain, Wind Energy Engineering, Mc GrawHill Companies, Inc., 2011, pp. 25-40.

E. Cheynet, J.B. Jakobsen, J. Snæbjörnsson, J. Reuder, V. Kumer, B. Svardal, “Assessing the potential of a commercial pulsed lidar for wind characterisation at a bridge site”, Journal of Wind Engineering and Industrial Aerodynamics, vo. 161, pp. 17-26.

Hsuan, Y. Tasi, J. Ke, R. A. Prahmana, K. Chen , T. Lin, “Validation and Measurements of Floating LiDAR for Nearshore Wind Resource Assessment Application”, Energy Procedia, vol. 61, pp. 1699-702, 2014.

A. Pérez, M. Ángeles García, M. Luisa Sánchez, B. de Torre, “Fit of wind speed and temperature profiles in the low atmosphere from rass sodar data”, Journal of Atmospheric and Solar-Terrestrial Physics, vol. 68, pp. 1125-35, 2006.

D. A. Smith, M. Harris, A. S. Coffey, et al., “Wind lidar evaluation at the Danish wind test site in Høvsøre”, European Wind Energy Conference(EWEC) 2004, London, pp. 44-6, 2004.

D. Kindler, “Testing and calibration of various LiDAR remote sensing devices for a 2 year offshore wind measurement campaign”, European Wind Energy Conference(EWEC) 2009, Marseille, pp. 141-3, 2009.

Z. R. Shu, Q. S. Li, Y. C. He, P. W. Chan, “Observations of offshore wind characteristics by Doppler-LiDAR for wind energy applications”, Applied Energy, vol. 169, pp. 150-63, 2016.

D. Kim, T. Kim, G. Oh, J. Huh, K. Ko, “A comparison of ground-based LiDAR and met mast wind measurements for wind resource assessment over various terrain conditions”, Journal of Wind Engineering and Industrial Aerodynamics, vol. 158, pp.109-21, 2016.

Jeju Special Self-Governing Province, Administrative statistics information,, [accessed on 17.02.06].

Leosphere, WindCube V2 LiDAR Remote Sensor User Manual version 06, Leosphere, pp.18-9.

Thies Clima, The product information,, [accessed on 17.02.06].

Hyundai Heavy Industries, Business - Green Energy,, [accessed on 17.02.06].

Hyosung Power & Industrial systems, Products & Solutions – Green Energy,, [accessed on 17.02.06].

B. Cañadillas, A. Westerhellweg, T. Neumann, “Testing the Performance of a Ground-based Wind LiDAR System”, DEWI Magazine, No. 38, pp. 58-64, 2011.

Measnet, Evaluation of Site-specific Wind Conditions, Version 1, Measnet, 2009, pp. 14-8.

Filgueira, H. González-Jorge, S. Lagüela, L. Díaz-Vilariño, P. Arias, “Quantifying the influence of rain in LiDAR performance”, Measurement, vol. 95, pp. 143-148, 2017.

International Electrotechnical Commission (IEC), IEC 61400-12-1, Wind Turbines - power performance measurements of electricity producing wind turbines, 1st ed., IEC, 2005, pp. 15, 33-5.

International Electrotechnical Commission (IEC), IEC 61400-12-1, Wind Turbines - power performance measurements of electricity producing wind turbines, Draft FDIS, IEC, 2016, pp. 31.

G. Gualtieri, “Development and application of an integrated wind resource assessment tool for wind farm planning”, International Journal of Renewable Energy Research, vol. 2, pp. 674-85, 2012.

A. Roy, “Directional and time-series distribution of projected wind profiles based on low altitude data”, International Journal of Renewable Energy Research, vol. 2 pp. 388-96, 2012.

A. Roy, “Assessment of commercial wind profiles for Bangladesh in hotspots determined by the UNEP”, International Journal of Renewable Energy Research, vol. 1, pp. 290-7, 2011.


  • There are currently no refbacks.

Online ISSN: 1309-0127;;

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Thomson Reuters)