A Review on Non-isolated Inductor Coupled DC-DC Converter for Photovoltaic Grid-Connected Applications

Dr. Rani C, CH Hussain Basha, Sarah odofin


In the present trend, the usage of photovoltaic power generation keeps on increasing due to non-availability of nonrenewable sources. Nowadays, the generation of solar power is increasing, but the efficiency of Photovoltaic (PV) is less. Generally conventional boost converters are used to increase the voltage of PV, but it’s not widely used due to its high duty ratio, increased voltage stress, switching losses and increased cost of converter. To overcome all the above drawbacks and to improve the system efficiency, different types of inductor coupled dc-dc converters have been considered and merits and demerits of all the type of dc-dc converter is listed in this paper. Among all dc-dc converters, the capacitor clamp inductor coupled dc-dc converter is preferred by most of researchers to improve the overall system performance and reduce the cost of the converter.

Total Views: 193


DC-DC converters, Efficiency, Inductor coupled, Photovoltaic module, Reverse recovery.

Full Text:







Veerachary, Mummadi, Tomonobu Senjyu, and Katsumi Uezato. "Neural-network-based maximum-power-point tracking of coupled-inductor interleaved-boost-converter-supplied PV system using fuzzy controller." IEEE Transactions on Industrial Electronics 50.4 (2003): 749-758.

Krishnaswami, Hariharan, and Ned Mohan. "Three-port series-resonant DC–DC converter to interface renewable energy sources with bidirectional load and energy storage ports." IEEE Transactions on Power Electronics 24.10 (2009): 2289-2297.

Qin, Lijun, and Xiao Lu. "Matlab/Simulink-based research on maximum power point tracking of photovoltaic generation." Physics Procedia 24 (2012): 10-18.

Hua, Chihchiang, and Chihming Shen. "Study of maximum power tracking techniques and control of DC/DC converters for photovoltaic power system." Power Electronics Specialists Conference, 1998. PESC 98 Record. 29th Annual IEEE. Vol. 1. IEEE, 1998.

Li, Wuhua, and Xiangning He. "Review of nonisolated high-step-up DC/DC converters in photovoltaic grid-connected applications." IEEE Transactions on Industrial Electronics 58.4 (2011): 1239-1250.

Moskowitz, P. D., et al. "Public health issues in photovoltaic energy systems: an overview of concerns." Solar cells 19.3 (1987): 287-299.

Lauria, Davide, and Marino Coppola. "Design and control of an advanced PV inverter." Solar Energy 110 (2014): 533-542.

Petrone, Giovanni, et al. "Reliability issues in photovoltaic power processing systems." IEEE Transactions on Industrial Electronics 55.7 (2008): 2569-2580.


Endo, Hisahito, Takashi Yamashita, and Toshiyuki Sugiura. "A high-power-factor buck converter." Power Electronics Specialists Conference, 1992. PESC'92 Record., 23rd Annual IEEE. IEEE, 1992.

Fossas, Enric, and Gerard Olivar. "Study of chaos in the buck converter." IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications 43.1 (1996): 13-25.


Carlson, Eric J., Kai Strunz, and Brian P. Otis. "A 20 mV input boost converter with efficient digital control for thermoelectric energy harvesting." IEEE Journal of Solid-State Circuits 45.4 (2010): 741-750.

Alonso, J. Marcos, et al. "Analysis and design of the integrated double buck–boost converter as a high-power-factor driver for power-LED lamps." IEEE Transactions on Industrial Electronics 59.4 (2012): 1689-1697.

Safari, Azadeh, and Saad Mekhilef. "Simulation and hardware implementation of incremental conductance MPPT with direct control method using cuk converter." IEEE transactions on industrial electronics 58.4 (2011): 1154-1161.

Chiang, S. J., Hsin-Jang Shieh, and Ming-Chieh Chen. "Modeling and control of PV charger system with SEPIC converter." IEEE Transactions on Industrial Electronics 56.11 (2009): 4344-4353.


  • There are currently no refbacks.

Online ISSN: 1309-0127


ijrereditor@gmail.com; ilhcol@gmail.com;

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Thomson Reuters)